Description:

The biofireplace is designed as an insert in stone and marble portals, as well as walls and niches made of non-combustible materials. The biofireplace is capable of recreating a living flame up to 20 cm high, while leaving the fuel inside the unit.

The metal stand is made of 2 mm steel. It is painted in two layers of high quality heat resistant black paint, which is protected from external influences and provides perfect color for long term use.
High quality heat resistant stainless steel of 2-8 mm thickness has been used for manufacturing this bio fireplace.
The body is coated with several layers of black heat resistant fireplace paint.
Thanks to the device of the inner compartment, the fuel does not boil.
The front panel has a quality finish and is not subject to deformation due to the use of 6mm thick steel.
The fuel refueling place is offset, which is very convenient. You only need to unscrew the lid, insert the funnel and pour the fuel to a certain level.
The fireplace is filled with ceramic, ethanol retaining absorbent fibers. Thanks to these fibers, fuel leaks, pops and flashes are not a concern for the fireplace.
The finish has a flawless look as the exterior and interior of the fireplace are sanded using state-of-the-art equipment.
Heat-resistant glass made in Germany is not afraid of overheating. Thickness 4 mm, height 100 mm. The method of processing the ends - euro edging.
You can extinguish the fireplace at any time, the fuel will remain inside the block. Odor during extinguishing is minimal, due to the fact that the flame arrester is located outside the fuel block.
The fasteners are made of full-body steel, resistant to corrosion.